The four-column hydraulic press can be officially delivered for use. The following details the matters that should be paid attention to during the commissioning of the four-column hydraulic press.
1, wipe the anti-rust oil, and clean the whole machine.
2. Connect the cooling water.
3. Inject hydraulic oil into the tank, and the oil injection amount is about 270 liters.
4, turn on the power, and check whether the body is well grounded, close the main switch, start the motor (no oil start), pay attention to the motor rotation direction (according to the sign arrow direction).
5, in the center position between the upper and lower table place a diameter of not less than Phi 300mm, height of not less than 600mm, and can withstand more than 150 tons, the upper and lower plane of the parallel work is not less than 0.02/ Phi 300mm pad.
