The quality of brake pads is mainly determined by the materials used, and it is difficult to distinguish the good from the bad with the naked eye. Identify genuine brake pads need to have specialized knowledge and skills to test out, the following editorial to explain some important details of the distinction:
1. Look at the packaging. Original parts packaging is generally more standardized, unified standard specifications, clear and formal print handwriting, while the shoddy product packaging printing is relatively shoddy, it is often easy to find a break from the packaging;
2. Look at the color. The surface of some original parts is designated a certain color, and if other colors are encountered, they are counterfeit and shoddy parts;
3. Look at the appearance. The appearance of the original accessories is clear and formal with printed or casted words and markings, while the appearance of the counterfeit products is rough;
4. Look at the paint. Unlawful businessmen will simply process the waste parts and sell them as qualified products to get high profits illegally;
5. Look at the texture. The original parts of the material is according to the design requirements of qualified materials, shoddy products are mostly cheap and low-quality materials instead;
6. Look at the process. The appearance of inferior products is sometimes good, but due to poor production process, easy to crack, sand holes, slag, burrs or bruises;
7. Look at storage. Brake pads, if dry cracks, oxidation, discoloration or aging and other problems, may be in the storage of the poor environment, long storage time, the material itself is poor and other reasons.
8. Look at the joint. If the brake pads rivets loose, dehiscence, electrical parts joint welding, paper cartridge seams, etc., can not be used.
9. Look at the logo. Some regular parts are marked with certain marks, pay attention to recognize the production license on the packaging and the specified friction coefficient mark, without these two signs of the product, its quality is difficult to guarantee.
10. Look at the missing. Regular assembly parts must be complete and intact to ensure smooth installation and normal operation. Some assembly parts on the individual small parts leakage, these to the installation difficulties. Often due to the shortage of individual small parts, resulting in the scrapping of the entire assembly.
Professional brake pads production line manufacturer
More than 3,000 brake pad molds available
Any questions, please don't hesitate to contact us.
☎️ WhatsApp/Tel/Wechat: +86 135 0719 4818
📧 Email: xuhua@whmrdm.com
🤗 Website: https://www.wh-mrd.com/
