Working Principle
Hydraulic hose crimping machine is a kind of equipment that uses hydraulic principle to firmly buckle metal fittings onto hydraulic hoses, rubber hoses and other kinds of hoses to form a complete fitting assembly. It is mainly used to realise the reliable connection of hoses and fittings in the hydraulic system, to ensure the sealed transmission of hydraulic oil, gas or other fluids, and is widely used in the industries of vehicles, engineering machinery, hydraulic machinery, welding and cutting equipment.
Products Features
High precision of buckling: it can accurately control the amount of buckling to ensure that the joints and hoses are connected closely and firmly, and the roundness and taper error of the buckled products are small, which can effectively ensure the sealing and stability of the hydraulic system.
High pressure: it can produce large buckling pressure, which can meet the buckling requirements of hoses and fittings of different specifications and materials, and even high-pressure, large-diameter hoses can be reliably connected.
Easy to operate: usually equipped with simple and easy to understand the operation interface and control device, the operator can be skilled in operation after simple training, and some of them also have the function of automatic buckling, which improves the working efficiency.
Strong adaptability: it can adapt to the buckling of many sizes and types of hoses and fittings by replacing moulds of different specifications, with a wide range of applications.
Safe and reliable: Equipped with various safety protection devices, such as overload protection, leakage protection, etc., which can effectively protect the safety of operators and equipment and reduce the possibility of accidents.
Operation Precautions
Before use: check whether the parts of the equipment are normal, whether the level of hydraulic oil is within the prescribed range, whether the power supply is connected correctly, whether the mould is firmly installed and matched with the specifications of the hose and connector to be buckled.
During operation: operate in strict accordance with the operating procedures, place the hoses and fittings correctly in the mould to ensure the accurate position, and avoid buckling on non-buckling parts such as hexagonal nuts. During operation, it is strictly prohibited to put your hands or other body parts into the working area of the mould to prevent accidents.
After use: turn off the power, clean the debris and oil on the surface of the equipment, clean the mould and store it properly. Regularly service and maintain the equipment, check whether there is leakage in the hydraulic system, whether there is wear and tear of each part, etc., and replace the damaged parts in time.
